TM-9-2320-365-34-1
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 1 OF 2
AUGUST 2005
CHANGE 2
TM-9-2320-365-34-1 - Page 18 of 1334
TM 9-2320-365-34-1
WARNING SUMMARY (CONT)
WARNING
11K Self-recovery winch (SRW) weighs approximately 130 lbs (59 kgs). Attach
a suitable lifting device prior to installation. Failure to comply may result in
injury to personnel or damage to equipment.
WARNING
Use care when removing screws. Pump is under spring tension. Failure to
comply may result in injury to personnel.
WARNING
Use care when installing screws, pump is under spring tension.
Failure to
comply may result in injury to personnel.
WARNING
Machine gun ring assembly weighs approximately 350 lbs (159 kgs). Attach a
suitable lifting device prior to installation. Failure to comply may result in injury
to personnel or damage to equipment.
WARNING
Some chemical agents (detergents, solvents, alkalis, etc.) may irritate skin or be
harmful to the eyes, nose, and throat. Some must be used only with adequate
ventilation. When working with potentially harmful chemical substances, read
and heed all warnings on the product labels and follow prescribed safety
precautions. When working with any potentially harmful substance; including
live steam, hot water, and compressed air; wear appropriate safety equipment
and use extreme care. Failure to comply may result in injury to personnel.
WARNING
High pressure steam can blow particles or chemicals into eyes, can cause
severe burns, and creates hazardous noise levels. Wear appropriate eye, skin,
and hearing protection when using high pressure steam. Failure to comply may
result in serious injury to personnel.
WARNING
Follow these general precautions whenever using these methods of crack
detection to prevent personnel injury. Never shine the black light directly into
the eyes. Do not smoke or eat while using inspection chemicals. Avoid getting
chemicals on clothing. Avoid inhaling spray mist, airborne powder dust and
solvent vapors. Provide adequate ventilation. Store chemicals away from open
flames and sources of heat. Failure to comply may result in injury to personnel.
p
Change 1
Back to Top
