TM-9-2320-365-34-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 1 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-1 - Page 187 of 1334

Change 1

2-101

TM 9-2320-365-34-1

RESISTANCE TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter

to pin 1 of turbine speed sensor.

(3)

Connect negative (-) probe of multimeter

to pin 2 of turbine speed sensor and note

reading on multimeter.

(4)

If resistance is less than 200 ohms or

greater than 400 ohms, replace

transmission turbine speed sensor

(para 6-5).

(5)

If resistance is between 200 and

400 ohms, replace WTEC II TEPSS

(TM 9-2320-365-20-3).

(6)

Connect internal wiring harness connector

TSS to turbine speed sensor.

(7)

Install cover on control valve module with

four screws.

(8)

Install control valve module (para 7-10).

(9)

Connect adapter cable 24-pin connector to

internal wiring harness 24-pin connector.

(10)

Tighten screw in adapter cable 24-pin

connector.

(11)

Connect batteries (TM 9-2320-365-20-3).