TM-9-2320-365-34-2
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2
AUGUST 2005
CHANGE 2
TM-9-2320-365-34-2 - Page 107 of 1414
TM 9-2320-365-34-2
3-4. ENGINE FRONT RESILIENT MOUNT AND MOUNTING BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)
Sling, Engine and Transmission, Motor Vehicle (Item
49, Appendix B)
Tools and Special Tools (Cont)
Goggles, Industrial (Item 25, Appendix B)
Materials/Parts
Nut, Self-locking (2) (Item 131, Appendix F)
Nut, Self-locking (3) (Item 133, Appendix F)
Mount, Resilient (Item 115, Appendix F)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working
under
vehicle
due
to
the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Removal.
WARNING
Engine weighs approximately 1500 lbs
(681 kgs). Attach a suitable lifting device
prior to removal. Failure to comply may
result in
serious injury or death to
personnel or damage to equipment.
CAUTION
Raise engine enough to remove pressure
from mounts. Failure to comply may result in
damage to equipment.
(1) Raise engine (1).
3-59
Back to Top
