TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 1216 of 1414

TM 9-2320-365-34-2

D-5. CAB SUPPORT TOOL

Make the cab support tool from 0.38 in. (9.6 mm) flat steel stock and angle iron stock according to the following

instructions. Refer to the parts list and

Figure D-11. Cab Support Tool Strut and Cab Rest

for details.

Item

Part Number

Material Description

Size

Qty

1

N/A

Steel, Flat Bar

4.0 in. (102 mm) X 33.38 in. X (84.8 cm) X 0.38

in. (9.6 mm)

1

2

N/A

Steel, Flat Bar

4.0 in. (102 mm) X 12.0 in. (305 mm) X 0.38 in.

(9.6 mm)

1

3

N/A

Angle Iron

2.0 in. (51 mm) X 2.0 in. (51 mm) X 3.5 in. (89

mm)

2

4

H.S.105VW-1

Omsi;gro[. CSA 105 C

5

IC 551

Coating, Compound,

Plastisol

NA

1

Figure D-11. Cab Support Tool Strut and Cab Rest

a. All dimensions are in inches (millimeters).

b. Cut cab support tool strut (1) from steel flat bar and bend to shape as shown in

Figure D-11. Cab Support Tool

Strut and Cab Rest

.

c. Cut cab support tool cab rest (2) from steel flat bar.

d. De-burr and remove sharp edges.

D-16

D-16