TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 1271 of 1414

TM 9-2320-365-34-2

D-50. M1079 WINDOW SASH GLAZING SEALS

Fabricate the M1079 window sash glazing seals according to the following steps. Refer to the following parts list for

materials.

Description

Material Part

Number

CAGE

Code

Cut Length

Window Sash Top/Bottom Seal

941P00001

0SHR6

26-13/16 in. (681 mm)

Window Sash Side Seal (van body

serial numbers 001 through 190)

941P00001

0SHR6

28-1/2 in. (724 mm)

Window Sash Side Seal (van body

serial number 191 and higher)

941P00001

0SHR6

12-11/16 in. (322 mm)

a. Dimensions are in inches (millimeters).

b. Cut seal material to the specified length using a

fine-toothed hacksaw or other suitable cutting tool.

NOTE

Cut miters so that short side of seal faces

toward glass.

c. Cut 45-degree miters on ends of window sash seals.

D-51. BLOCK SEAL 12420489 FABRICATION

Make block seal from P/N (0VXY8) STN2.38X.5. Use a suitable cutting tool to cut seal to 0.52 inch (1.3 cm) long.

Change 1

D-71/(D-72 Blank)