TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005
CHANGE 2

  TM-9-2320-365-34-2 - Page 167 of 1414

TM 9-2320-365-34-2
WARNING
Use care when removing springs. Springs
are
under
tension
and
can
act
as
projectiles when removed.
Failure to
comply may result in injury to personnel.
(3) Remove plug (7), spring (8), and bypass valve (9) from
oil filter base (4).
(4) Remove preformed packing (10) from plug (7). Discard
preformed packing.
b. Installation.
NOTE
Apply lubricating oil to all parts during
assembly.
(1) Install bypass valve (1) and spring (2) in oil filter base
(3).
(2) Install preformed packing (4) on plug (5).
(3) Install plug (5) in oil filter base (3).
(4) Install three preformed packings (6) on oil filter base (3).
(5) Position oil filter base (3) on engine (7) with five washers
(8), two bolts (9), and three screws (10).
(6) Tighten two bolts (9) and three screws (10) to 15-25 lb-ft
(20-34 N·m).
3-117


Back to Top