TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 197 of 1414

TM 9-2320-365-34-2

CAUTION

Do not overtighten locking nuts. Failure to

comply may result in damage to threads.

(26) Tighten locking nut (15) while holding fuel setting screw

(16).

(27) Check adjustment by repeating steps (14) through (16).

(28) If indicator does not indicate +0.01 to +0.05 mm, repeat

steps (21) through (26).

(29) Remove dial indicator group from cylinder head (3).

(30) Install bolt (7) where dial indicator group was installed.

NOTE

When synchronizing more than one fuel

injector, apply consistent pressure on rack

assembly from one fuel injector to the next to

ensure accurate dial indicator readings.

(31) Perform steps (1) through (30) on all injectors being

synchronized.

NOTE

Perform step (32) if fuel setting is known to

be incorrect.

(32) Perform fuel setting check (para 4-4).

4-9