TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 356 of 1414

TM 9-2320-365-34-2

7-36

Change 2

7-4.

TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT)

(50) Position six bolts (57) in flexplate (58).

(51) Tighten six bolts (57) to 25-29 lb-ft (34-39 N

•

m).

(52) Install plug (59) in flywheel housing (60).

(53) Position 12 bolts (61) in flexplate (58).

(54) Tighten 12 bolts (61) to 18-22 lb-ft (24-30 N

•

m).

(55) Position gasket (62) and flywheel cover (63) on

flywheel housing (60) with four washers (64) and

screws (65).

(56) Install gasket (62), flywheel cover (63), and

transmission oil cooler hose bracket (66) on flywheel

housing (60) with four washers (64) and screws (65).

(57) Tighten four screws (65) to 22-26 lb-ft (30-35 N

•

m).

NOTE

•

Perform steps (50) through (52) on vehicle

serial number 1478 and higher.

•

Steps (50) and (51) require the aid of an

assistant.

•

During installation of

flexplate bolts,

access each flexplate bolt by turning

alternator pulley through a series of short

NOTE

•

Perform steps (53) and (54) on vehicle

serial number 0001 through 1477.

•

Steps (53) and (54) require the aid of an

assistant.

•

During installation of flexplate bolts, acc-

ess each flexplate bolt by turning alternator

pulley through a series of short arcs.

NOTE

Perform steps (55) and (56) on vehicles

equipped with transmission oil cooler tubes.

NOTE

Perform step (56) on vehicles equipped with

transmission oil cooler hoses.