TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 569 of 1414

TM 9-2320-365-34-2

13-5. REAR TENSION BEAM AND TAILLIGHT MOUNTING BRACKET REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Taillight carriers removed (TM 9-2320-365-20-3).

Tools and Special Tools

Tool Kit, Genl Mech (Item 68, Appendix B)

Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B)

Wrench Set, Socket (Item 74, Appendix B)

Goggles, Industrial (Item 25, Appendix B)

Materials/Parts

Bolt (14) (Item 10, Appendix F) (M1078/M1079)

Nut, Self-locking (14) (Item 134, Appendix F)

Bolt (10) (Item 10, Appendix F) (M1081)

Personnel Required

(2)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Removal.

CAUTION

When removing bolts, continuous removal of

collars is mandatory. Failure to comply will

result in seizing of collar to bolt.

NOTE

• Left and right side of rear tension beam is

removed the same way. Left side shown.

• Steps (1) through (5) require the aid of an

assistant.

(1) Remove two collars (1) and bolts (2) from rear tension

beam (3). Discard collars and bolts.

Change 1

13-9