TM 9-2320-365-34-2
NOTE
Perform step (97) on vehicles equipped with
transmission oil cooler tubes.
(97) Remove four screws (165), washers (166), flywheel
cover (167) and gasket (167.1) from flywheel housing
(168). Discard gasket.
NOTE
Perform step (97.1) on vehicles equipped
with transmission oil cooler hoses.
(97.1) Remove four screws (165), washers (166), transmission
oil cooler hose bracket (168.2), flywheel cover (167), and
gasket (167.1) from flywheel housing (168).
Discard
gasket.
NOTE
• Perform step (98) on vehicle serial number 0001
through 1477.
• Step (98) requires the aid of an assistant.
• During removal of flexplate bolts, access each
flexplate bolt by turning alternator pulley through
a series of short arcs.
(98) Remove 12 bolts (169) from flexplate (170).
(98.1) Install flywheel cover (167) on flywheel housing (168)
with four washers (166) and screws (165).
Change 1
3-27