TM-9-2320-366-10-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; OPERATOR’S INSTRUCTIONS; VOLUME NO. 1 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-366-10-1 - Page 145 of 802

TM 9-2320-366-10-1

Change 2

2-15

b.

Auxiliary Panel Controls and Indicators for M1090 and M1094.

Figure 2-7 shows

all controls and indicators that may be located on the auxiliary panel for the M1090

and M1094.

Figure 2-7.

Auxiliary Panel Controls and Indicators for M1090 and M1094

1. TACH (Tachometer) (Models with Power Take-Off [PTO]).

Shows speed of

engine crankshaft in revolutions per minute (rpm x 100).

Tachometer is used to

monitor engine speed for PTO operation.

2. Winch Switch (Models with 15K Self-Recovery Winch [SRW]).

Locks

transmission in Neutral for self-recovery operation.

3. WINCH IN/OUT Switch (Models with 15K Self-Recovery Winch [SRW]).

Controls

reel in/pay out of cable.

PTO and winch switches must be turned on before WINCH

IN/OUT switch will operate. Push top half of switch to pay out cable, bottom half of

switch to reel in cable.

4. PTO Switch (Models with PTO).

Controls operation of PTO.

5. DELETED.

6. DELETED.