TM 9-2320-366-10-1
2-56
Change 2
Table 2-1.
Preventive Maintenance Checks and Services (All Models) (Cont)
Location
Item
No.
Interval
Item to
Check/
Service
Crewmember
Procedure
Not Fully Mission
Capable If:
3
WARNING
•
Extreme care should be taken when removing coolant fill cap if temperature
gage reads above 180°F (82°C). Contact with steam or hot coolant under
pressure may result in injury to personnel.
•
Pressure in coolant reservoir must be released before removing cap.
Failure to comply may result in injury to personnel.
•
Do not operate vehicle if radiator cap is damaged or missing. Failure to
comply will result in injury to personnel or damage to equipment.
3
Before
Coolant
a.
Check coolant level.
Coolant level should be
between upper
sightglass and lower
sightglass on radiator
overflow tank with
engine not running.
Add coolant as
required (Appendix F
Note 4).
a.
Coolant level
below lower
sightglass.
Before
Coolant
b.
Check for oil in
coolant.
b.
If engine oil is
present, Notify
Unit Main-
tenance.