TM-9-2320-366-10-1
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; OPERATOR’S INSTRUCTIONS; VOLUME NO. 1 OF 2
AUGUST 2005
CHANGE 2
TM-9-2320-366-10-1 - Page 19 of 802
TM 9-2320-366-10-1
WARNING
Do not operate Material Handling Crane (MHC) and 15K Self-Recovery Winch
(SRW) at the same time. Load may unexpectedly shift. Failure to comply may
result in serious injury or death to personnel.
WARNING
Do not operate Material Handling Crane (MHC) unless outriggers are set up
and MHC is level from side to side. Failure to comply may result in serious
injury or death to personnel.
WARNING
Material Handling Crane (MHC) must be operated with REMOTE CONTROL
UNIT if Operator is not able to keep load in sight at all times during operation.
Failure to comply may result in serious injury or death to personnel.
WARNING
Main panel Material Handling Crane (MHC) controls must not be used when
REMOTE CONTROL UNIT is connected. MHC may move inadvertently. Failure
to comply may result in serious injury or death to personnel.
WARNING
Wheels must always be chocked before operating Material Handling Crane
(MHC). Vehicle may move or load may shift. Failure to comply may result in
serious injury to personnel or damage to equipment.
WARNING
Goggles must be worn while operating Material Handling Crane (MHC)
controls. Blowing dust and debris may become airborne while engine is
running. Failure to comply may result in serious injury to personnel.
WARNING
Outriggers must be positioned so that Material Handling Crane (MHC) is level
from side to side. Use of MHC when vehicle is not level can cause vehicle to
roll over. Failure to comply may result in serious injury or death to personnel.
Change 1
q
Back to Top
