TM-9-2320-366-10-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; OPERATOR’S INSTRUCTIONS; VOLUME NO. 2 OF 2

AUGUST 2005
CHANGE 2

  TM-9-2320-366-10-2 - Page 271 of 930

TM 9-2320-366-10-2
CAUTION
• Stinger cam lock is normally locked in second rectangular hole on stinger
when towing M1078/M1083. It may be necessary to lock stinger cam lock
in third rectangular hole on stinger if components mounted on rear of
M1078/M1083 interfere with movement of crossbar. Lock stinger cam lock
in hole which will allow crossbar to rotate freely. Failure to comply may
result in damage to equipment.
• It may be necessary to start with holes 4 or 5 on stinger when recovering a
vehicle on uneven ground. Once level ground is reached, lock stinger in
second hole. Failure to comply may cause damage to equipment.
(11) Place STINGER lever (14) to IN position to retract stinger (15) until stinger cam lock
holes (16) are aligned.
(12) Lock stinger cam lock (5).
2-647


Back to Top