TM-9-2320-366-10-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; OPERATOR’S INSTRUCTIONS; VOLUME NO. 2 OF 2
AUGUST 2005
CHANGE 2
TM-9-2320-366-10-2 - Page 54 of 930
TM 9-2320-366-10-2
2-42. 30K WINCH OPERATION
a. 30K Winch Operation with Load.
WARNING
Ensure there are at least five wraps of cable on hoist drum at all
times. Failure to comply may result in serious injury or death to
personnel or damage to equipment.
CAUTION
Ensure hydraulic shutoff valve and return valve are open before operating
hydraulic equipment.
Failure to comply may result in damage to
equipment.
(1) Start engine (para 2-27a or b).
(2) Position vehicle so the pull is as straight as possible and the 30K winch pull capacity
is adequate for equipment to be recovered. Refer to FM 20-22 and Table 2-20. 30K
Winch Pull Capacity.
Table 2-20. 30K Winch Pull Capacity
Cable
Layer
Maximum Line Pull
(cable reeled in at
high speed)
Maximum Line Pull
(cable reeled in at
low speed)
Bottom Layer
(five wraps
minimum)
15,000 lbs (66,720 N)
30,000 lbs (133,440 N)
2nd Layer
12,720 lbs (56,579 N)
25,440 lbs (113,157 N)
3rd Layer
11,045 lbs (49,128 N)
22,090 lbs (98,256 N)
4th Layer
9,758 lbs (43,404 N)
19,515 lbs (86,803 N)
5th Layer
8,740 lbs (38,876 N)
17,480 lbs (77,751 N)
Top Layer
7,915 lbs (35,206 N)
15,830 lbs (70,412 N)
2-442
Back to Top
