TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1067 of 1824

Change 1

2-604.135

TM 9-2320-366-20-1

CONTINUITY TEST

(1)

Remove nut, lockwasher, terminal lug TL16,

and lockwasher from LH rear marker light

screw.

Discard lockwashers.

(2)

Step multimeter to ohms.

(3)

Connect positive (+) probe of multimeter

to terminal lug TL16.

(4)

Connect negative probe of multimeter to

ground and note reading on multimeter.

(5)

If continuity is not present, repair 3094

from terminal lug TL16 to terminal lug

TL18 (para 2-45) and go to step 8 of this

fault if required or replace M1086/M1089

rear lights cable assembly (para 7-104) or

M1085/M1096 rear lights cable assembly

(para 7-84) and go to step 1 of this fault.

Table 2-12.12.

M1085/M1086/M1089/M1096

LH Rear Marker Light Splices

M1085/M1086/M1096

M1089

E15

E16

E49

E51

Model

Splice "A"

Splice "B"

(6)

If continuity is present, repair 489 from

splice "A" to splice "B" (refer to Table

2-12.12.

M1085/M1086/M1089/M1096

LH Rear Marker Light Splices) (para 2-45)

and go to step 8 of this fault if required or

replace M1086/M1089 rear lights cable

assembly (para 7-104) or M1085/M1096

rear lights cable assembly (para 7-84) and

go to step 1 of this fault.

(7)

Install lockwasher, terminal lug TL16,

lockwasher, and nut on LH rear marker

light screw.