WARNING
(1)
Remove plug from adapter fitting on inlet
side of fuel filter base.
(2)
Prepare STE/ICE-R Test #50 (TM 9-4910-
571-12&P) to adapter fitting.
(3)
Start engine (TM 9-2320-366-10-1).
(4)
Perform STE/ICE-R Test #50 (TM 9-4910-
571-12&P).
(5)
Raise idle speed to 2000 rpm for 10
seconds.
(6)
Pressure should read between 39 psi and
58 psi.
(7)
Record test results.
(8)
Shut down engine (TM 9-2320-366-10-1).
(9)
If pressure is below 39 psi, notify DS
Maintenance.
STE/ICE-R TEST #50
Diesel fuel is flammable. If fuel is spilled,
clean it up immediately. Failure to comply
may result in serious injury or death to
personnel.
TM 9-2320-366-20-1
Change 1
2-108.5