TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 237 of 1824

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

2-117

2-117

2-117

2-117

2-117

(1)

Remove ether cylinder (para 4-13).

(2)

Shake ether cylinder to determine

if ether is present.

(3)

Check ether cylinder for damage.

(4)

Install ether cylinder (para 4-13).

Temperature at engine block

must be below 100° F

(38° C) before ether starting

aid will work.

NOTE

WARNING

Starting fluid is toxic and

highly flammable.

Container

is pressurized.

NEVER heat

container and NEVER discharge

starting fluid in confined areas

or near open flame.

Failure to

comply may result in injury to

personnel.

ETHER CYLINDER INSPECTION

ETHER VALVE TEST

(1)

Position master power switch to on (TM

9-2320-366-10-1).

(2)

Press ether start switch (TM

9-2320-366-10-1) and listen for ether valve

to click.

(3)

Position master power switch to off (TM

9-2320-366-10-1).