TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-366-20-1 - Page 355 of 1824

VOLTAGE TEST
Remove rings, bracelets, watches, necklaces,
and any other jewelry before working around
vehicle.
Jewelry can catch on equipment and
cause injury or short across electrical circuits
and cause severe burns or electrical shock.
WARNING
(1) Set multimeter to volts DC.
(2) Connect positive (+) probe of multimeter to
neutral start relay socket 85 on VIM.
(3) Connect negative (-) probe of multimeter to
ground.
(4) Install circuit breaker CB35 in PDP and note
reading on multimeter.
(5) If 12 VDC is not present, go to step 43 of
this fault.
(6) Remove circuit breaker CB35 from PDP.
TM 9-2320-366-20-1
Change 1
2-225


Back to Top