TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 423 of 1824

CONTINUITY TEST

(1) Lift dust boot on left 12V LOAD terminal

stud on 200 AMP terminal block.

(2) Remove nut, lockwasher, washer, and

terminal lug TL80 from left 12V LOAD

terminal stud on 200 AMP terminal block.

Discard lockwasher.

(3) Remove nut, lockwasher, washer, and

terminal lug TL172 from right 12V LOAD

terminal stud on 200 AMP terminal block.

Discard lockwasher.

(4) Set multimeter to ohms.

(5) Connect positive (+) probe of multimeter to

left 12V LOAD terminal stud on 200 AMP

terminal block.

(6) Connect negative (-) probe of multimeter to

right 12V LOAD terminal stud on 200 AMP

terminal block and note reading on

multimeter.

(7) If continuity is not present, replace 200 AMP

terminal block (para 20-58).

TM 9-2320-366-20-1

Change 1

2-266.27