TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 531 of 1824

TM 9-2320-366-20-1

RESISTANCE TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter to

connector PX6 pin 4.

(3)

Connect negative (-) probe of multimeter to

known good ground and note reading on

multimeter.

(4)

If 202-243 ohms resistance is not

present, go to step 4 of this fault.

Change 2

2-338.1

(1)

Start engine (TM 9-2320-366-10-1).

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

connector PX6 pin 4.

(4)

Connect negative (-) probe of multimeter to

known good ground and note reading on

multimeter.

(5)

If 90-130 ohms resistance is not present,

replace engine oil pressure transmitter

(para 7-49).

(6)

If 90-130 ohms resistance is present,

replace engine OIL PRESS gage (para 7-14).

(7)

Shut down engine (TM 9-2320-366-10-1).

(8)

Connect connector PX6 to engine OIL

PRESS gage connector.

(9)

Connect connector clamp to engine OIL

PRESS gage connector.

(10) Install instrument panel assembly

(para 7-15).

RESISTANCE TEST