TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 679 of 1824

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

2-407

2-407

2-407

2-407

2-407

VOLTAGE TEST

Remove rings, bracelets, watches,

necklaces, and any other jewelry

before working around vehicle.

Jewelry can catch on equipment

and cause injury or short across

electrical circuit and cause severe

burns or electrical shock.

WARNING

(10)

Connect PTO switch connector to PTO

switch.

(11)

Position auxiliary panel on auxiliary panel

housing with six screws.

(12)

Tighten six screws to 24 lb-in. (3 N·m).

(1)

Set multimeter to volts dc.

(2)

Connect positive (+) probe of multimeter to

"A" switch connector terminal 1.

(3)

Connect negative (-) probe of multimeter to

ground.

(4)

Position main light switch auxiliary lever to

PANEL BRT (TM 9-2320-366-10-1).

(5)

Position dimmer switch to maximum

brightness (TM 9-2320-366-10-1).

(6)

Position main light switch to SER DRIVE

(TM 9-2320-366-10-1) and note reading on

multimeter.

(7)

If 12 vdc is not present, repair wire 1908

(para 2-45) or replace auxiliary panel cable

assembly (para 7-58).

(8)

If 12 vdc is present, repair wire 3020

(para 2-45) or replace auxiliary panel cable

assembly (para 7-58).

(9)

Position main light switch to OFF

(TM 9-2320-366-10-1).