TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-1

  TM-9-2320-366-20-1 - Page 778 of 1824

TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
2-490
2-490
2-490
2-490
2-490
2.
If 24 vdc is not present,
wire 2034 is faulty.
Is 24 vdc present at
connector P172-A?
YES
WARNING
Read WARNING
on following page.
NO
Go to step 5 of this fault.
Other indicator lights
operate.
Lighted indicator
display OK.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
Voltage Test or
STE/ICE-R #89
REASON FOR QUESTION
3.
Is continuity present
between connector P172-B
and a known good ground?
KNOWN INFO
Other indicator lights
operate.
Lighted indicator
display OK.
Dashboard cable
assembly OK.
Auxiliary panel cable
assembly OK.
POSSIBLE PROBLEMS
TEST OPTIONS
Continuity Test or
STE/ICE-R #91
REASON FOR QUESTION
NO
YES
If continuity is not present,
wire 3022 is faulty.
If
continuity is present,
dump body switch is
faulty.
Faulty dashboard cable
assembly.
Faulty M1090/M1094
dump power cable
assembly.
Faulty dump body switch.
Faulty auxiliary panel
cable assembly.
Faulty M1090/M1094
dump power cable
assembly.
Faulty dump body switch.
Repair wire 3022 (para 2-45)
or replace M1090/M1094
dump power cable
assembly (para 7-125).
Replace dump body
switch (para 7-23).
e34.
DUMP UP INDICATOR DOES NOT OPERATE (CONT)
e34.
DUMP UP INDICATOR DOES NOT OPERATE (CONT)
e34.
DUMP UP INDICATOR DOES NOT OPERATE (CONT)
e34.
DUMP UP INDICATOR DOES NOT OPERATE (CONT)
e34.
DUMP UP INDICATOR DOES NOT OPERATE (CONT)


Back to Top