TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 1015 of 1632

CONTINUITY TEST

CONTINUITY TEST

(1)

Disconnect connector P119 from connector

J119.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

connector P119R.

(4)

Connect negative (-) probe of multimeter to

connector P73 pin C and note reading on

multimeter.

(5)

Connect positive (+) probe of multimeter

to connector P119f.

(6)

Connect negative (-) probe of multimeter to

connector P73 pin B and note reading on

multimeter.

(7)

Connect positive (+) probe of multimeter

to connector P119Z.

(8)

Connect negative (-) probe of multimeter to

connector P73 pin A and note reading on

multimeter.

(9)

If continuity is not present on one or more

wires, notify DS Maintenance.

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter to

connector P119R.

(3)

Connect negative (-) probe of multimeter to

all other pins in connector P119, one at a

time, and note reading on multimeter.

(4)

If continuity is found between pin R and

any other pin, notify DS Maintenance.

(5)

Perform steps (2) and (3) for P119f and

P119Z.

(6)

If continuity is found between pin f and

any other pin, or between pin Z and any

other pin, notify DS Maintenance.

(7)

Connect connector P73 to TPS connector.

Change 1

2-1771

TM 9-2320-366-20-2