TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 579 of 1632

TM 9-2320-366-20-2

Change 1

2-1450.1

CONTINUITY TEST

NOTE

(1) Set multimeter to ohms.

(2) Disconnect terminal lug on wire C from

RH counter balance valve.

(3) Connect positive (+) probe of multimeter

to terminal lug on wire C.

(4) Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(5) If continuity is not present, go to step 8 of

this fault.

(6) If continuity is present, notify DS

Maintenance.

(7) Connect terminal lug on wire C to RH

counter balance valve.

Perform steps (8) through (11) if continuity

is present from terminal lug on wire C to

ground.

(8) Close LH and RH catwalks.

(9) Install circuit breaker CB50 in PDP.

(10) Install PDP cover (para 16-2).

(11) Install wrecker control panel top cover

(para 14-4).