TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 747 of 1632

TM 9-2320-366-20-2

VOLTAGE TEST

(1)

Set multimeter to ohms.

(2)

Remove diode D2B from PDP.

(3)

Connect positive (+) probe of multimeter to

PDP, where relay K9 terminal 87 was

removed.

(4)

Connect negative (-) probe of multimeter to

PDP, where diode D2B terminal 4 was

removed and note reading on multimeter.

(5)

If continuity is not present, repair wire 1565

from relay K9 terminal 87 to diode D2B

terminal 4 (para 2-45) or replace WTEC II

dashboard cable assembly (para 7-10) or

WTEC III dashboard cable assembly

(para 7-11).

(6)

If continuity is present, replace relay K9

(para 7-9).

(7)

Install relay K9 in PDP.

(8)

Install diode D2B in PDP.

(9)

Install PDP cover (para 16-2).

(10)

Connect connector P905 to worklights

switch.

(11)

Position auxiliary panel on auxiliary

panel housing with six screws.

(12)

Tighten six screws to 24 lb-in. (3 N·m).

Change 1

2-1555