TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 792 of 1632

f4. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN

CODE 22 SUB CODE 16

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

References

TM 9-4910-571-12&P

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Multimeter, Digital (Item 22, Appendix C)

Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)

STE/ICE-R (Item 41, Appendix C)

TEST OPTIONS

If 200-400 ohms resistance is

not present, DS Maintenance

needs to be notified.

REASON FOR QUESTION

Resistance Test or

STE/ICE-R Test #91

Faulty output speed sensor.

Faulty WTEC II cab

transmission

harness.

Faulty WTEC II TEPSS.

POSSIBLE PROBLEMS

Transmission oil level OK.

Fuse OK.

Batteries OK.

KNOWN INFO

1.

Is 200-400 ohms resistance

present from output speed

sensor pin C to pin D?

START

NO

YES

Notify DS Maintenance.

WARNING

CAUTION

Read WARNING and

CAUTION on

following page.

TM 9-2320-366-20-2

2-1600

Change 1