TM-9-2320-366-20-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-2 - Page 95 of 1632
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
2-981
2-981
2-981
2-981
2-981
VOLTAGE TEST
Remove rings, bracelets, watches,
necklaces, and any other jewelry
before working around vehicle.
Jewelry can catch on equipment
and cause injury or short across
electrical circuit and cause severe
burns or electrical shock.
WARNING
(1)
Remove auxiliary panel and tilt back. Do not
disconnect connectors (para 7-8).
(2)
Disconnect connector P902 from winch
power switch.
(3)
Set multimeter to volts dc.
(4)
Connect positive (+) probe of multimeter to
connector P902 terminal 6.
(5)
Connect negative (-) probe of multimeter to
ground.
(6)
Position master power switch to on
(TM 9-2320-366-10-1).
(7)
Position PTO switch to on
(TM 9-2320-366-10-1) and note reading on
multimeter.
(8)
If 24 vdc is not present, repair wire 1904
(para 2-45) or replace auxiliary panel
cable assembly (para 7-58).
(9)
Position PTO switch to off
(TM 9-2320-366-10-1).
(10)
Position master power switch to off
(TM 9-2320-366-10-1).
Back to Top
