TM 9-2320-366-20-3
TM 9-2320-366-20-3
TM 9-2320-366-20-3
TM 9-2320-366-20-3
TM 9-2320-366-20-3
WARNING
Remove rings, bracelets, watches,
necklaces, and any other jewelry
before working around vehicle.
Jewelry can catch on equipment
and cause injury or short across
electrical circuit and cause severe
burns or electrical shock.
VOLTAGE TEST
(1)
Position master power switch to on
(TM 9-2320-366-10-1).
(2)
Connect positive (+) probe of multimeter to
connector P111D.
(3)
Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(4)
If 24 vdc is not present, repair wire 1793
(para 2-45) or replace WTEC II dashboard
cable assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).
(5)
Position master power switch to off
(TM 9-2320-366-10-1).
(6)
Connect connector P111 to connector J111.
2-2129
2-2129
2-2129
2-2129
2-2129