TM 9-2320-366-20-3
TM 9-2320-366-20-3
TM 9-2320-366-20-3
TM 9-2320-366-20-3
TM 9-2320-366-20-3
2-2141/(2-2142 Blank)
2-2141/(2-2142 Blank)
2-2141/(2-2142 Blank)
2-2141/(2-2142 Blank)
2-2141/(2-2142 Blank)
CONTINUITY TEST
(1)
Disconnect connector P110 from CTIS ECU.
(2)
Set multimeter to ohms.
(3)
Connect positive (+) probe of multimeter to
connector P111D.
(4)
Connect negative (-) probe of multimeter to
connector P110E and note reading on
multimeter.
(5)
If continuity is not present, repair wire 1528
(para 2-45) or replace CTIS cable assembly
(para 7-60).
(6)
If continuity is present, replace CTIS ECU
(para 12-6).
(7)
Connect connector P110 to CTIS ECU.
(8)
Connect connector P111 to connector J111.
(9)
Install kick panel (para 16-3).