TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 181 of 1396

TM 9-2320-366-20-3

TM 9-2320-366-20-3

TM 9-2320-366-20-3

TM 9-2320-366-20-3

TM 9-2320-366-20-3

STEERING GEAR TEST

NOTE

An alignment mark shall be made on

yoke and steering gear assembly shaft

prior to disassembly to ensure proper

alignment during installation.

(1)

Remove bolt and locknut from lower yoke

of steering gear arm.

Discard locknut.

(2)

Remove yoke from top steering gear

assembly shaft.

(3)

Remove drag link (para 13-3).

(4)

Turn pitman arm to check for binding and

proper output.

Notify DS Maintenance if

steering gear assembly fails to turn

smoothly or if it binds when top shaft is

turned.

(5)

Install drag link (para 13-3).

(6)

Position yoke on steering gear assembly.

(7)

Install bolt and locknut into yoke to top

steering gear assembly shaft.

(8)

Lower cab (TM 9-2320-366-10-1).

2-2171/(2-2172 Blank)

2-2171/(2-2172 Blank)

2-2171/(2-2172 Blank)

2-2171/(2-2172 Blank)

2-2171/(2-2172 Blank)