Change 2
2-2239
TM 9-2320-366-20-3
CAUTION
Wear approved eye protection when
performing pressure checks.
Failure to
comply may result in oil getting into eyes.
If oil contacts eyes, seek medical
attention immediately.
WARNING
NOTE
NOTE
(9) If Class III leaks are present, replace leaking
hydraulic hose or fitting (para 19-15).
(1) Start engine (TM 9-2320-366-10-1).
(2) Position PTO switch to on
(TM 9-2320-366-10-1).
Keep tachometer within 1,250-1,450
RPM when PTO is engaged.
Failure to
comply may result in damage to
equipment.
In the event of a tachometer failure, a
HAND THROTTLE lever positioned to L is
approximately 1,250-1,450 RPM.
(3) Set engine speed to 1250-1450 RPM
(TM 9-2320-366-10-1).
(4) Toggle DUMP UP/DOWN switch to UP
position momentarily (TM 9-2320-366-10-1).
(5) Check hydraulic hoses and fittings for Class III
leaks.
In the event of a tachometer failure, a
HAND THROTTLE lever positioned to L is
approximately 1,250-1,450 RPM.
(6) Set engine speed to 750 RPM
(TM 9-2320-366-10-1).
(7) Position PTO switch to off
(TM 9-2320-366-10-1).
(8) Shut down engine (TM 9-2320-366-10-1).