TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 561 of 1396

TM 9-2320-366-20-3

4-5. CHARGE AIR COOLER TO AIR INLET ELBOW TUBES AND HOSES

REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Cab raised (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Screwdriver Attachment, Socket Wrench (Item

61, Appendix B)

Tools and Special Tools (Cont)

Socket Set, Socket Wrench (Item 36, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Materials/Parts

Nut, Self-Locking (2) (Item 154, Appendix G)

a. Removal.

(1) Remove two self-locking nuts (1), screws (2), and upper

charge air tube bracket (3) from lower charge air tube

bracket (4). Discard self-locking nuts.

NOTE

Inner and outer charge air cooler to air inlet

elbow tubes are removed the same way.

Outer charge air cooler to air inlet elbow tube

shown.

(2) Loosen clamp (5) on hose (6).

(3) Disconnect hose (6) from air inlet elbow (7).

4-31