TM 9-2320-366-20-3
4-13. FUEL/WATER SEPARATOR AND FILTER REPLACEMENT
This task covers:
a. Filter Removal
b. Filter Installation
c. Pump Head Removal
d. Pump Head Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Cab raised (TM 9-2320-366-10-1).
Batteries disconnected (para 7-57).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Pan, Drain (Item 24, Appendix C)
Materials/Parts
Cloth, Cleaning (Item 16, Appendix D)
Oil, Fuel, Diesel (Item 36 or 37, Appendix D)
Filter Element, Fluid (Item 17, Appendix G)
Packing, Preformed (2) (Item 200, Appendix G)
WARNING
Diesel fuel is flammable. If fuel is spilled,
clean it up immediately. Failure to comply
may result in serious injury or death to
personnel.
a. Filter Removal.
(1) Disconnect
connector
clamp
(1)
from
fuel/water
separator connector (2).
(2) Disconnect connector P33 (3) from fuel/water separator
connector (2).
(3) Position drain pan under hose (4).
(4) Open drain valve (5) and allow fuel to drain.
(5) Loosen clamp (6) on hose (4).
(6) Remove hose (4) from drain valve (5).
4-72