TM 9-2320-366-20-3
Change 2
7-35
(16) Disconnect connector J925 (19) from connector
P925 (20)
(17) Remove auxiliary cable assembly (18) auxiliary
panel jumper cable assembly (21), and connector
J925 (1) from auxiliary panel housing (3).
b. Disassembly
(1)
Remove four nuts (1), screws (2), ring (3), rubber
shield (4), and ring (5) from auxiliary panel housing
(6).
(2)
Remove grommet (7) from auxiliary panel housing
(6).
c.
Assembly
(1)
Install grommet (1) in auxiliary panel (2).
(2)
Install ring (3), rubber shield (4), and ring (5)
on auxiliary panel (2) with four screws (6) and
nuts (7).
NOTE
Perform step (1) and (2) on models M1090
and M1094.
NOTE
Perform steps (1) and (2) on models M1090
and M1094.