TM 9-2320-366-20-3
(5) Install two terminal lugs (14) on circuit breaker (15) with
two lockwashers (16) and screws (17).
(6) Position circuit breaker (15) in junction box (2) with
lockring (18), lockwasher (19), and nut (20).
(7) Tighten nut (20) to 25 lb-in. (3 N·m).
(8) Install four terminal lugs (21) on terminal block (5)
positions 1, 2, 5 and 6 with four screws (22).
(9) Install ground strip (23) on junction box (2) with two
nylon
washers
(24),
screws
(25),
washers
(26),
lockwashers (27), and nuts (28).
(10) Install quick disconnect terminal (29) in ground strip (23)
position 13.
7-171