TM-9-2320-366-20-4
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-4 - Page 1146 of 1558
TM 9-2320-366-20-4
16-10. M1089 UNDERPLATE, SPLASH GUARD, AND BRACKETS REPLACEMENT
This task covers:
a. Underplate Removal
b. Underplate Installation
c. Left Front/Left Rear Bracket Removal
d. Left Front/Left Rear Bracket Installation
e. Right Front Bracket Removal
f.
Right Front Bracket Installation
g. Right Rear Bracket Removal
h. Right Rear Bracket Installation
i.
Splash Guard Removal
j.
Splash Guard Installation
k. Upper Bracket Removal
l.
Upper Bracket Installation
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Materials/Parts
Nut, Self-Locking (6) (Item 134, Appendix G)
Nut, Self-Locking (3) (Item 148, Appendix G)
Lockwasher (Item 108, Appendix G)
Lockwasher (Item 109, Appendix G)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working
under
vehicle
due
to
the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Underplate Removal.
(1) Remove three self-locking nuts (1), six washers (2),
three screws (3), and guard support (4) from underplate
(5). Discard self-locking nuts.
16-78
Back to Top
