TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 1162 of 1558

TM 9-2320-366-20-4

16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT)

(3) Install nut (6) on hook (7).

(4) Position rear splash guard (8) on bracket (1) with hook

(7), washer (9), plate (10), washer (11), and nut (12).

(5) Position two screws (13), washers (14), and nuts (15) on

bracket (1).

(6) Tighten nut (12) and two nuts (15) to 18-22 lb-ft (24-30

N·m).

g. M1084 Rear Splash Guard Removal.

NOTE

Left

and

right

rear

splash

guards

are

removed the same way. Right side shown.

(1) Remove three nuts (1), washers (2), spacers (3), rods

(4), and rear splash guard (5) from bumper (6) and

fender (7).

(2) Remove three nuts (8) from rods (4).

h. M1084 Rear Splash Guard Installation.

NOTE

Left and right rear splash guards are installed

the same way. Right side shown.

(1) Position three nuts (1) on rods (2).

(2) Position rear splash guard (3) between fender (4) and

bumper (5) with three rods (2), spacers (6), washers (7),

and nuts (8).

(3) Tighten three nuts (8) to 18-22 lb-ft (24-30 N·m).

16-94

Change 1