TM 9-2320-366-20-4
7-91. M1084/M1086 HOIST DOWN SOLENOID CABLE REPLACEMENT (CONT)
b. Installation.
(1) Position hoist down solenoid cable (1) through clamp (2).
(2) Position
hoist
down
solenoid
cable
(1)
through
compression nut (3), washer (4), and connector (5).
(3) Install washer (4) and compression nut (3) on connector
(5).
(4) Tighten nut (6) on clamp (2).
(5) Install quick disconnect terminal (7) on two black wires
(8).
(6) Install terminal lug (9) on white wire (10).
(7) Install quick disconnect terminal (7) on ground strip (11)
position 1.
(8) Install terminal lug (9) on terminal block (12) position 24
with screw (13).
(9) Apply varnish to quick disconnect terminal (7) and
terminal lug (9).
7-456