TM 9-2320-366-20-4
7-96. M1084/M1086 REMOTE CONTROL CABLE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (para 7-57).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Tool Kit, Electrical (Item 45, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Varnish, Oil (Item 70, Appendix D)
Lockwasher (4) (Item 106, Appendix G)
Lockwasher (Item 100, Appendix G)
a. Removal.
NOTE
Remove plastic cable ties as required.
(1) Remove cap (1) from connector (2).
(2) Remove nut (3) and lockwasher (4) from connector (2).
Discard lockwasher.
(3) Remove connector (2) from mounting bracket (5).
(4) Loosen four screws (6) on junction box (7).
(5) Open cover (8) on junction box (7).
7-474