TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 276 of 1558

TM 9-2320-366-20-4

7-124. M1090/M1094 DUMP CABLE ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Dump body raised to maintenance position (TM 9-

2320-366-10-1).

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

Materials/Parts

Dispenser, Pressure Adhesive Sensitive Tape

(Item 20, Appendix D)

Lockwasher (8) (Item 110, Appendix G)

Nut, Self-Locking (6) (Item 165, Appendix G)

a. Removal.

(1) Disconnect connector P172 (1) from connector J172 (2).

(2) Remove four nuts (3), lockwashers (4), screws (5), and

connector J172 (2) from connector plate (6).

Discard

lockwashers.

(3) Remove four nuts (7), lockwashers (8), screws (9), and

connector plate (6) from crossmember (10).

Discard

lockwashers.

(4) Disconnect connector P25 (11) from dump body switch

connector (12).

(5) Remove self-locking nut (13), screw (14), washer (15),

and clamp (16) from crossmember (10). Discard self-

locking nut.

(6) Remove clamp (16) from dump cable assembly (17).

7-608