TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-366-20-4 - Page 355 of 1558

TM 9-2320-366-20-4
7-137. WTEC II CAB TRANSMISSION HARNESS REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Instrument panel assembly removed for access (para
7-15).
Kick panel removed (para 16-3).
Personnel heater removed (para 18-9).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Lockwasher (4) (Item 76, Appendix G)
Gasket (Item 25, Appendix G)
Personnel Required
(2)
a. Removal.
NOTE
Tag wires and connection points prior to
disconnecting.
(1) Remove screw (1), washer (2), and ground terminal lug
(3) from WTEC II TEPSS (4).
(2) Disconnect connector J115 (5) from WTEC II TEPSS (4).
(3) Disconnect connector J114 (6) from WTEC II TEPSS (4).
(4) Disconnect connector J118 (7) from connector P118 (8).
7-685


Back to Top