TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 446 of 1558

TM 9-2320-366-20-4

8-6. WTEC II VEHICLE INTERFACE MODULE (VIM) REPLACEMENT/REPAIR (CONT)

d. Installation.

NOTE

If replacing WTEC II VIM and a WTEC II VIM

is not available, perform para 8-8.

(1) Connect connector PX33 (1) to WTEC II VIM (2).

(2) Tighten screw (3) in connector PX33 (1).

(3) Connect connector J116 (4) to WTEC II VIM (2).

(4) Tighten screw (5) in connector J116 (4).

(5) Install WTEC II VIM (2) on bottom of dashboard (6) with

two washers (7), washer (8), and screw (9).

(6) Install two washers (10) and screws (11) in WTEC II VIM

(2).

e. Follow-On Maintenance.

(1) Install kick panel (para 16-3).

(2) Connect batteries (para 7-57).

(3) Start engine (TM 9-2320-366-10-1).

(4) Road test vehicle (TM 9-2320-366-10-1).

(5) Shut down engine (TM 9-2320-366-10-1).

End of Task.

8-22