TM-9-2320-366-20-4
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-4 - Page 550 of 1558
TM 9-2320-366-20-4
8-23.
M1083/M1084/M1085/M1086/M1093 TRANSMISSION OIL COOLER HOSES
INITIAL INSTALLATION
This task covers:
a. Installation
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-57).
Cab raised (TM 9-2320-366-10-1).
Transmission oil cooler tubes removed (para 8-
17).
M1083/M1084/M1085/M1086/M1093 trans-mission
auxiliary oil cooler hoses removed (para 8-15).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Pan, Drain (Item 24, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque 0-175 lb-ft (Item 58, Appendix C)
Crowfoot Attachment, Socket Wrench (Item 12.1,
Appendix B)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix
C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape (Item
20, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Antiseize Compound (Item 58, Appendix D)
Hose Assembly (Item 24.3, Appendix D)
(M1083/M1093)
Hose Assembly (Item 24.4, Appendix D)
(M1084/M1085)
Hose Assembly (Item 24.5, Appendix D) (M1086)
Hose Assembly (Item 24.7, Appendix D)
Hose Assembly (Item 24.11, Appendix D)
(M1083/M1093)
Hose Assembly (Item 24.8, Appendix D)
(M1084/M1085)
Hose Assembly (Item 24.10, Appendix D) (M1086)
Hose Assembly (Item 24.1, Appendix D)
Elbow, Pipe to Tube (Item 20.2, Appendix D)
Adapter, Straight, Pipe to Boss (2) (Item 1.1,
Appendix D)
Elbow, Pipe to Boss (4) (Item 20.1, Appendix D)
Clamp, Loop (3) (Item 14.1, Appendix D)
Clamp, Loop (Item 14.2, Appendix D)
Screw, Cap, Hex Hd (4) (Item 53.1, Appendix D)
Nut, Self-Locking (4) (Item 150, Appendix G)
Bracket, Angle (Item 13.1, Appendix D)
Washer, Flat (4) (Item 280.2, Appendix G)
Screw, Cap, Hex Hd (4) (Item 53.2, Appendix D)
Gasket (Item 29.3, Appendix G)
WARNING
• Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
• Ensure exhaust system is cool before performing maintenance. Failure to comply may result in
injury to personnel.
8-110
Change 1
Back to Top
