TM-9-2320-366-20-4
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-4 - Page 65 of 1558
TM 9-2320-366-20-4
7-83. M1089 WRECKER CONTROL PANEL WIRING HARNESS REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (para 7-57).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Tool Kit, Electrical (Item 45, Appendix C)
Material/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Lockwasher (8) (Item 100, Appendix G)
Nut, Self-Locking (2) (Item 133, Appendix G)
Splice, Conductor (11) (Item 274.4, Appendix G)
Splice, Conductor (4) (Item 274.5, Appendix G)
Splice, Conductor (Item 274.6, Appendix G)
a. Removal.
(1) Remove eight screws (1), lockwashers (2), and washers
(3)
from
control
panel
top
cover
(4).
Discard
lockwashers.
(2) Remove two self-locking nuts (5), four washers (6), two
screws (7), and control panel top cover (4) from
WRECKER CONTROL PANEL (8). Discard self-locking
nuts.
Change 1
7-389
Back to Top
