TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-366-20-4 - Page 826 of 1558

TM 9-2320-366-20-4
11-30. LOW PRESSURE TRANSMITTER TWO-WAY CHECK VALVE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Cab raised (TM 9-2320-366-10-1).
Air tanks drained (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Materials/Parts
Antiseize Compound (Item 58, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Adhesive (Item 8, Appendix D)
Lockwasher (2) (Item 93, Appendix G)
Adhesive (Item 10.1, Appendix D)
a. Removal.
NOTE
• Perform step (1) on vehicle serial number 7448
and higher and vehicle serial numbers 0001
through 7447 that have previously had front
lights cable assembly replaced.
• Tag wires, air hoses, and connection points prior
to removal.
(1) Remove adhesive and boot (1) from low pressure
transmitter (1.1).
(1.1) Remove adhesive, two nuts (2), lockwashers (3), and
terminal lugs TL201 (4) and TL202 (5) from low pressure
transmitter (1.1). Discard lockwashers.
(2) Disconnect two air hoses (6) from tee fitting (7).
(3) Disconnect air hose (8) from fitting (9).
(4) Disconnect air hose (10) from 90-degree fitting (11).
11-182
Change 1


Back to Top