TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 940 of 1558

TM 9-2320-366-20-4

14-4. M1089 CATWALKS REPLACEMENT

This task covers:

a. 30K Winch Frame Catwalk Removal

b. 30K Winch Frame Catwalk Installation

c. Center Catwalk Removal

d. Center Catwalk Installation

e. Left Catwalk Removal

f.

Left Catwalk Installation

g. Control Panel/Hand Rail Catwalk Removal

h. Control Panel/Hand Rail Catwalk Installation

i.

Right Catwalk Removal

j.

Right Catwalk Installation

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb ft (Item 58, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Materials/Parts

Sealing Compound (Item 57, Appendix D)

Nut, Self-Locking (2) (Item 147, Appendix G)

Materials/Parts (Cont)

Nut, Self-Locking (50) (Item 146, Appendix G)

Nut, Self-Locking (2) (Item 149, Appendix G)

Nut, Self-Locking (2) (Item 148, Appendix G)

Lockwasher (2) (Item 96, Appendix G)

Lockwasher (8) (Item 100, Appendix G)

Lockwasher (6) (Item 102, Appendix G)

Pin, Cotter (2) (Item 235, Appendix G)

Personnel Required

(2)

a. 30K Winch Frame Catwalk Removal.

NOTE

Left and right side 30K winch catwalks are

removed the same way. Left side shown.

(1) Open catwalk (1) to gain access.

NOTE

Step (2) requires the aid of an assistant.

(2) Remove three self-locking nuts (2), and screws (3) from

hinge (4). Discard self-locking nuts.

(14-11 Blank)/14-12

Change 1