TM
TM 9-2320-366-20-4
9-2320-366-20-4
14-9. M1083/M1084/M1085/M1086/M1093 SPARE TIRE RETAINER REPLACEMENT/
REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Spare tire removed (TM 9-2320-366-10-2).
Cab raised (TM 9-2320-366-10-1).
Hydraulic manifold removed (para 19-4).
Tool box removed (para 16-17).
Cab leveling valve removed (para 16-8).
Air/hydraulic power unit and bracket removed (para
19-3).
Ether starting aid removed (para 4-15).
Shunt removed (para 7-29).
100 amp reverse polarity relay removed, if equipped
(para 7-30).
200 amp reverse polarity relay removed, if equipped
(M1093) (para 20-47).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Pan, Drain (Item 24, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Tools and Special Tools (Cont)
Goggles, Industrial (Item 15, Appendix C)
Socket Set, Socket Wrench (Item 36, Appendix
C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix
C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Cap and Plug Set (Item 14, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Nut, Self-Locking (12) (Item 156, Appendix G)
Nut, Self-Locking (4) (Item 128, Appendix G)
Pin, Cotter (2) (Item 231, Appendix G)
Personnel Required
(3)
a. Removal.
CAUTION
Cap or plug intake air cleaner hoses to
prevent
contamination
of
turbocharger.
Failure to comply may result in damage to
turbocharger and engine.
(1) Loosen clamp (1) on intake air cleaner boot (2).
(2) Disconnect intake air cleaner boot (2) from intake air
cleaner housing (3).
(3) Loosen clamp (4) on air compressor intake hose (5).
(4) Disconnect air compressor intake hose (5) from intake
air cleaner boot (2).
14-64
14-64