TM-9-2320-366-20-5
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-5 - Page 293 of 1158
TM 9-2320-366-20-5
19-3. AIR/HYDRAULIC POWER UNIT AND BRACKET REPLACEMENT/REPAIR
This task covers:
a. Air/Hydraulic Power Unit Removal
b. Air/Hydraulic Power Unit Disassembly
c. Air/Hydraulic Power Unit Cleaning/Inspection
d. Air/Hydraulic Power Unit Assembly
e. Air/Hydraulic Power Unit Installation
f.
Bracket Removal
g. Bracket Installation
h. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Spare tire lowered (TM 9-2320-366-10-2).
M13 decontamination unit removed, if equipped (TM 3-
4230-214-12&P).
Air springs deflated (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Wrench Set, Socket (Item 51, Appendix C)
Pan, Drain (Item 24, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Materials/Parts
Packing, Preformed (2) (Item 186, Appendix G)
Gasket (Item 31, Appendix G)
Packing, Preformed (2) (Item 189.1, Appendix G)
Materials/Parts (Cont)
Packing, Preformed (Item 207.1, Appendix G)
Packing, Preformed (Item 197.2, Appendix G)
Gasket (Item 27.1, Appendix G)
Washer, Flat (Item 280.1, Appendix G)
Lockwasher (3) (Item 105.2, Appendix G)
Packing, Preformed (Item 197.1, Appendix G)
Packing, Preformed (2) (Item 192.2, Appendix G)
Retainer, Packing (2) (Item 241.2, Appendix G)
Retainer, Packing (2) (Item 241.3, Appendix G)
Rags, Wiping (Item 50, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Cap and Plug Set (Item 14, Appendix D)
Antiseize Compound (Item 58, Appendix D)
Hydraulic Fluid A (Item 25, Appendix D)
Washer, Spring (4) (Item 291, Appendix G)
Nut, Self-Locking (4) (Item 168, Appendix G)
References
TM 3-4230-214-12 & P
Change 1
19-5
Back to Top
