TM 9-2320-366-20-5
20-62. LIGHT MATERIAL HANDLING CRANE (LMHC) WEIGHT BLOCK AND WIRE ROPE
REPLACEMENT/REPAIR.
NOTE
Perform
step
(5)
if
weight
block
was
replaced.
(5) Install two weight blocks (7) on wire rope (1) with two
screws (8), lockwashers (9), and nuts (10).
(6) Position wire rope (1) in sheave (11).
(7) Install quick release pin (12) in boom (13).
c. Follow-On Maintenance.
(1) Retract LMHC wire rope assembly (TM 9-2320-366-10-
1).
(2) Extend and retract LMHC wire rope assembly to check
for proper function (TM 9-2320-366-10-1).
(3) Remove LMHC remote control cable (TM 9-2320-366-10-
1).
(4) Remove LMHC power cable (TM 9-2320-366-10-1).
(5) Notify DS maintenance to perform LHMC load test.
End of Task.
20-342